版本: 最新版本-3.5

使用 StarGo 部署和管理 StarRocks

本文档介绍如何使用 StarGo 部署和管理 StarRocks 集群。

StarGo 是一个用于管理多个 StarRocks 集群的命令行工具。您可以通过 StarGo 轻松部署、检查、升级、降级、启动和停止多个集群。

安装 StarGo

将以下文件下载到您的中心控制节点

sr-ctl：StarGo 的二进制文件。下载后无需安装。
sr-c1.yaml：部署配置文件的模板。
repo.yaml：StarRocks 安装程序的下载路径的配置文件。

注意您可以访问 http://cdn-thirdparty.starrocks.com 以获取相应的安装索引文件和安装程序。

wget https://github.com/wangtianyi2004/starrocks-controller/raw/main/stargo-pkg.tar.gz
wget https://github.com/wangtianyi2004/starrocks-controller/blob/main/sr-c1.yaml
wget https://github.com/wangtianyi2004/starrocks-controller/blob/main/repo.yaml

授予 sr-ctl 访问权限。

chmod 751 sr-ctl

部署 StarRocks 集群

您可以使用 StarGo 部署 StarRocks 集群。

前提条件

要部署的集群必须至少有一个中心控制节点和三个部署节点。所有节点都可以部署在一台机器上。
您需要在中心控制节点上部署 StarGo。
您需要在中心控制节点和三个部署节点之间建立相互 SSH 身份验证。

以下示例在中心控制节点 sr-dev@r0 和三个部署节点 starrocks@r1、starrocks@r2 和 starrocks@r3 之间建立相互身份验证。

## Build the mutual authentication between sr-dev@r0 and starrocks@r1, 2, 3.
[sr-dev@r0 ~]$ ssh-keygen
[sr-dev@r0 ~]$ ssh-copy-id starrocks@r1
[sr-dev@r0 ~]$ ssh-copy-id starrocks@r2
[sr-dev@r0 ~]$ ssh-copy-id starrocks@r3

## Verify the mutual authentication between sr-dev@r0 and starrocks@r1, 2, 3.
[sr-dev@r0 ~]$ ssh starrocks@r1 date
[sr-dev@r0 ~]$ ssh starrocks@r2 date
[sr-dev@r0 ~]$ ssh starrocks@r3 date

创建配置文件

基于以下 YAML 模板创建 StarRocks 部署拓扑文件。有关详细信息，请参阅配置。

global:
    user: "starrocks"   ## The current OS user.
    ssh_port: 22

fe_servers:
  - host: 192.168.XX.XX
    ssh_port: 22
    http_port: 8030
    rpc_port: 9020
    query_port: 9030
    edit_log_port: 9010
    deploy_dir: StarRocks/fe
    meta_dir: StarRocks/fe/meta
    log_dir: StarRocks/fe/log
    priority_networks: 192.168.XX.XX/24 # Specify the unique IP for current node when the machine has multiple IP addresses.
    config:
      sys_log_level: "INFO"
  - host: 192.168.XX.XX
    ssh_port: 22
    http_port: 8030
    rpc_port: 9020
    query_port: 9030
    edit_log_port: 9010
    deploy_dir: StarRocks/fe
    meta_dir: StarRocks/fe/meta
    log_dir: StarRocks/fe/log
    priority_networks: 192.168.XX.XX/24 # Specify the unique IP for current node when the machine has multiple IP addresses.
    config:
      sys_log_level: "INFO"
  - host: 192.168.XX.XX
    ssh_port: 22
    http_port: 8030
    rpc_port: 9020
    query_port: 9030
    edit_log_port: 9010
    deploy_dir: StarRocks/fe
    meta_dir: StarRocks/fe/meta
    log_dir: StarRocks/fe/log
    priority_networks: 192.168.XX.XX/24 # Specify the unique IP for current node when the machine has multiple IP addresses.
    config:
      sys_log_level: "INFO"
be_servers:
  - host: 192.168.XX.XX
    ssh_port: 22
    be_port: 9060
    be_http_port: 8040
    heartbeat_service_port: 9050
    brpc_port: 8060
    deploy_dir : StarRocks/be
    storage_dir: StarRocks/be/storage
    log_dir: StarRocks/be/log
    priority_networks: 192.168.XX.XX/24 # Specify the unique IP for current node when the machine has multiple IP addresses.
    config:
      create_tablet_worker_count: 3
  - host: 192.168.XX.XX
    ssh_port: 22
    be_port: 9060
    be_http_port: 8040
    heartbeat_service_port: 9050
    brpc_port: 8060
    deploy_dir : StarRocks/be
    storage_dir: StarRocks/be/storage
    log_dir: StarRocks/be/log
    priority_networks: 192.168.XX.XX/24 # Specify the unique IP for current node when the machine has multiple IP addresses.
    config:
      create_tablet_worker_count: 3
  - host: 192.168.XX.XX
    ssh_port: 22
    be_port: 9060
    be_http_port: 8040
    heartbeat_service_port: 9050
    brpc_port: 8060
    deploy_dir : StarRocks/be
    storage_dir: StarRocks/be/storage
    log_dir: StarRocks/be/log
    priority_networks: 192.168.XX.XX/24 # Specify the unique IP for current node when the machine has multiple IP addresses.
    config:
      create_tablet_worker_count: 3

创建部署目录（可选）

如果要部署 StarRocks 的路径不存在，并且您有权创建此类路径，则无需创建这些路径，StarGo 将根据配置文件为您创建它们。如果路径已经存在，请确保您具有对它们的写入访问权限。您还可以通过运行以下命令在每个节点上创建必要的部署目录。

在 FE 节点上创建 meta 目录。

mkdir -p StarRocks/fe/meta

在 BE 节点上创建 storage 目录。

mkdir -p StarRocks/be/storage

注意确保上述路径与配置文件中的配置项 meta_dir 和 storage_dir 相同。

部署 StarRocks

通过运行以下命令部署 StarRocks 集群。

./sr-ctl cluster deploy <cluster_name> <version> <topology_file>

参数	描述
cluster_name	要部署的集群的名称。
version (版本)	StarRocks 版本。
topology_file	配置文件的名称。

如果部署成功，集群将自动启动。当 beStatus 和 feStatus 为 true 时，集群已成功启动。

示例

[sr-dev@r0 ~]$ ./sr-ctl cluster deploy sr-c1 v2.0.1 sr-c1.yaml
[20220301-234817  OUTPUT] Deploy cluster [clusterName = sr-c1, clusterVersion = v2.0.1, metaFile = sr-c1.yaml]
[20220301-234836  OUTPUT] PRE CHECK DEPLOY ENV:
PreCheck FE:
IP                    ssh auth         meta dir                   deploy dir                 http port        rpc port         query port       edit log port
--------------------  ---------------  -------------------------  -------------------------  ---------------  ---------------  ---------------  ---------------
192.168.xx.xx         PASS             PASS                       PASS                       PASS             PASS             PASS             PASS
192.168.xx.xx         PASS             PASS                       PASS                       PASS             PASS             PASS             PASS
192.168.xx.xx         PASS             PASS                       PASS                       PASS             PASS             PASS             PASS

PreCheck BE:
IP                    ssh auth         storage dir                deploy dir                 webSer port      heartbeat port   brpc port        be port
--------------------  ---------------  -------------------------  -------------------------  ---------------  ---------------  ---------------  ---------------
192.168.xx.xx         PASS             PASS                       PASS                       PASS             PASS             PASS             PASS
192.168.xx.xx         PASS             PASS                       PASS                       PASS             PASS             PASS             PASS
192.168.xx.xx         PASS             PASS                       PASS                       PASS             PASS             PASS             PASS


[20220301-234836  OUTPUT] PreCheck successfully. RESPECT
[20220301-234836  OUTPUT] Create the deploy folder ...
[20220301-234838  OUTPUT] Download StarRocks package & jdk ...
[20220302-000515    INFO] The file starrocks-2.0.1-quickstart.tar.gz [1227406189] download successfully
[20220302-000515  OUTPUT] Download done.
[20220302-000515  OUTPUT] Decompress StarRocks pakcage & jdk ...
[20220302-000520    INFO] The tar file /home/sr-dev/.starrocks-controller/download/starrocks-2.0.1-quickstart.tar.gz has been decompressed under /home/sr-dev/.starrocks-controller/download
[20220302-000547    INFO] The tar file /home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1.tar.gz has been decompressed under /home/sr-dev/.starrocks-controller/download
[20220302-000556    INFO] The tar file /home/sr-dev/.starrocks-controller/download/jdk-8u301-linux-x64.tar.gz has been decompressed under /home/sr-dev/.starrocks-controller/download
[20220302-000556  OUTPUT] Distribute FE Dir ...
[20220302-000603    INFO] Upload dir feSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/fe] to feTargetDir = [StarRocks/fe] on FeHost = [192.168.xx.xx]
[20220302-000615    INFO] Upload dir JDKSourceDir = [/home/sr-dev/.starrocks-controller/download/jdk1.8.0_301] to JDKTargetDir = [StarRocks/fe/jdk] on FeHost = [192.168.xx.xx]
[20220302-000615    INFO] Modify JAVA_HOME: host = [192.168.xx.xx], filePath = [StarRocks/fe/bin/start_fe.sh]
[20220302-000622    INFO] Upload dir feSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/fe] to feTargetDir = [StarRocks/fe] on FeHost = [192.168.xx.xx]
[20220302-000634    INFO] Upload dir JDKSourceDir = [/home/sr-dev/.starrocks-controller/download/jdk1.8.0_301] to JDKTargetDir = [StarRocks/fe/jdk] on FeHost = [192.168.xx.xx]
[20220302-000634    INFO] Modify JAVA_HOME: host = [192.168.xx.xx], filePath = [StarRocks/fe/bin/start_fe.sh]
[20220302-000640    INFO] Upload dir feSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/fe] to feTargetDir = [StarRocks/fe] on FeHost = [192.168.xx.xx]
[20220302-000652    INFO] Upload dir JDKSourceDir = [/home/sr-dev/.starrocks-controller/download/jdk1.8.0_301] to JDKTargetDir = [StarRocks/fe/jdk] on FeHost = [192.168.xx.xx]
[20220302-000652    INFO] Modify JAVA_HOME: host = [192.168.xx.xx], filePath = [StarRocks/fe/bin/start_fe.sh]
[20220302-000652  OUTPUT] Distribute BE Dir ...
[20220302-000728    INFO] Upload dir BeSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/be] to BeTargetDir = [StarRocks/be] on BeHost = [192.168.xx.xx]
[20220302-000752    INFO] Upload dir BeSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/be] to BeTargetDir = [StarRocks/be] on BeHost = [192.168.xx.xx]
[20220302-000815    INFO] Upload dir BeSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/be] to BeTargetDir = [StarRocks/be] on BeHost = [192.168.xx.xx]
[20220302-000815  OUTPUT] Modify configuration for FE nodes & BE nodes ...
############################################# START FE CLUSTER #############################################
############################################# START FE CLUSTER #############################################
[20220302-000816    INFO] Starting leader FE node [host = 192.168.xx.xx, editLogPort = 9010]
[20220302-000836    INFO] The FE node start succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-000836    INFO] Starting follower FE node [host = 192.168.xx.xx, editLogPort = 9010]
[20220302-000857    INFO] The FE node start succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-000857    INFO] Starting follower FE node [host = 192.168.xx.xx, editLogPort = 9010]
[20220302-000918    INFO] The FE node start succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-000918    INFO] List all FE status:
                                        feHost = 192.168.xx.xx       feQueryPort = 9030     feStatus = true
                                        feHost = 192.168.xx.xx       feQueryPort = 9030     feStatus = true
                                        feHost = 192.168.xx.xx       feQueryPort = 9030     feStatus = true

############################################# START BE CLUSTER #############################################
############################################# START BE CLUSTER #############################################
[20220302-000918    INFO] Starting BE node [BeHost = 192.168.xx.xx HeartbeatServicePort = 9050]
[20220302-000939    INFO] The BE node start succefully [host = 192.168.xx.xx, heartbeatServicePort = 9050]
[20220302-000939    INFO] Starting BE node [BeHost = 192.168.xx.xx HeartbeatServicePort = 9050]
[20220302-001000    INFO] The BE node start succefully [host = 192.168.xx.xx, heartbeatServicePort = 9050]
[20220302-001000    INFO] Starting BE node [BeHost = 192.168.xx.xx HeartbeatServicePort = 9050]
[20220302-001020    INFO] The BE node start succefully [host = 192.168.xx.xx, heartbeatServicePort = 9050]
[20220302-001020  OUTPUT] List all BE status:
                                        beHost = 192.168.xx.xx       beHeartbeatServicePort = 9050      beStatus = true
                                        beHost = 192.168.xx.xx       beHeartbeatServicePort = 9050      beStatus = true
                                        beHost = 192.168.xx.xx       beHeartbeatServicePort = 9050      beStatus = true

您可以通过查看集群信息来测试集群。

您还可以通过使用 MySQL 客户端连接集群来测试它。

mysql -h 127.0.0.1 -P9030 -uroot

查看集群信息

您可以查看 StarGo 管理的集群的信息。

查看所有集群的信息

通过运行以下命令查看所有集群的信息。

./sr-ctl cluster list

示例

[sr-dev@r0 ~]$ ./sr-ctl cluster list
[20220302-001640  OUTPUT] List all clusters
ClusterName      User        CreateDate                 MetaPath                                                      PrivateKey
---------------  ----------  -------------------------  ------------------------------------------------------------  --------------------------------------------------
sr-c1            starrocks   2022-03-02 00:08:15        /home/sr-dev/.starrocks-controller/cluster/sr-c1              /home/sr-dev/.ssh/id_rsa

查看特定集群的信息

通过运行以下命令查看特定集群的信息。

./sr-ctl cluster display <cluster_name>

示例

[sr-dev@r0 ~]$ ./sr-ctl cluster display sr-c1
[20220302-002310  OUTPUT] Display cluster [clusterName = sr-c1]
clusterName = sr-c1
ID                          ROLE    HOST                  PORT             STAT        DATADIR                                             DEPLOYDIR
--------------------------  ------  --------------------  ---------------  ----------  --------------------------------------------------  --------------------------------------------------
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   /dataStarRocks/fe/meta
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   /dataStarRocks/fe/meta
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   /dataStarRocks/fe/meta
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage

启动集群

您可以通过 StarGo 启动 StarRocks 集群。

启动集群中的所有节点

通过运行以下命令启动集群中的所有节点。

./sr-ctl cluster start <cluster-name>

示例

[root@nd1 sr-controller]# ./sr-ctl cluster start sr-c1
[20220303-190404  OUTPUT] Start cluster [clusterName = sr-c1]
[20220303-190404    INFO] Starting FE node [FeHost = 192.168.xx.xx, EditLogPort = 9010]
[20220303-190435    INFO] Starting FE node [FeHost = 192.168.xx.xx, EditLogPort = 9010]
[20220303-190446    INFO] Starting FE node [FeHost = 192.168.xx.xx, EditLogPort = 9010]
[20220303-190457    INFO] Starting BE node [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220303-190458    INFO] Starting BE node [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220303-190458    INFO] Starting BE node [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]

启动特定角色的节点

启动集群中的所有 FE 节点。

./sr-ctl cluster start <cluster_name> --role FE

启动集群中的所有 BE 节点。

./sr-ctl cluster start <cluster_name> --role BE

示例

[root@nd1 sr-controller]# ./sr-ctl cluster start sr-c1 --role FE
[20220303-191529  OUTPUT] Start cluster [clusterName = sr-c1]
[20220303-191529    INFO] Starting FE cluster ....
[20220303-191529    INFO] Starting FE node [FeHost = 192.168.xx.xx, EditLogPort = 9010]
[20220303-191600    INFO] Starting FE node [FeHost = 192.168.xx.xx, EditLogPort = 9010]
[20220303-191610    INFO] Starting FE node [FeHost = 192.168.xx.xx, EditLogPort = 9010]

[root@nd1 sr-controller]# ./sr-ctl cluster start sr-c1 --role BE
[20220303-194215  OUTPUT] Start cluster [clusterName = sr-c1]
[20220303-194215    INFO] Starting BE node [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220303-194216    INFO] Starting BE node [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220303-194217    INFO] Starting BE node [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220303-194217    INFO] Starting BE cluster ...

启动特定节点

启动集群中的特定节点。目前，仅支持 BE 节点。

./sr-ctl cluster start <cluster_name> --node <node_ID>

您可以通过查看特定集群的信息来检查特定节点的 ID。

示例

[root@nd1 sr-controller]# ./sr-ctl cluster start sr-c1 --node 192.168.xx.xx:9060
[20220303-194714  OUTPUT] Start cluster [clusterName = sr-c1]
[20220303-194714    INFO] Start BE node. [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]

停止集群

您可以通过 StarGo 停止 StarRocks 集群。

停止集群中的所有节点

通过运行以下命令停止集群中的所有节点。

./sr-ctl cluster stop <cluster_name>

示例

[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster stop sr-c1
[20220302-180140  OUTPUT] Stop cluster [clusterName = sr-c1]
[20220302-180140  OUTPUT] Stop cluster sr-c1
[20220302-180140    INFO] Waiting for stoping FE node [FeHost = 192.168.xx.xx]
[20220302-180143  OUTPUT] The FE node stop succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-180143    INFO] Waiting for stoping FE node [FeHost = 192.168.xx.xx]
[20220302-180145  OUTPUT] The FE node stop succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-180145    INFO] Waiting for stoping FE node [FeHost = 192.168.xx.xx]
[20220302-180148  OUTPUT] The FE node stop succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-180148  OUTPUT] Stop cluster sr-c1
[20220302-180148    INFO] Waiting for stoping BE node [BeHost = 192.168.xx.xx]
[20220302-180148    INFO] The BE node stop succefully [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220302-180148    INFO] Waiting for stoping BE node [BeHost = 192.168.xx.xx]
[20220302-180149    INFO] The BE node stop succefully [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220302-180149    INFO] Waiting for stoping BE node [BeHost = 192.168.xx.xx]
[20220302-180149    INFO] The BE node stop succefully [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]

停止特定角色的节点

停止集群中的所有 FE 节点。

./sr-ctl cluster stop <cluster_name> --role FE

停止集群中的所有 BE 节点。

./sr-ctl cluster stop <cluster_name> --role BE

示例

[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster stop sr-c1 --role BE
[20220302-180624  OUTPUT] Stop cluster [clusterName = sr-c1]
[20220302-180624  OUTPUT] Stop cluster sr-c1
[20220302-180624    INFO] Waiting for stoping BE node [BeHost = 192.168.xx.xx]
[20220302-180624    INFO] The BE node stop succefully [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220302-180624    INFO] Waiting for stoping BE node [BeHost = 192.168.xx.xx]
[20220302-180625    INFO] The BE node stop succefully [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220302-180625    INFO] Waiting for stoping BE node [BeHost = 192.168.xx.xx]
[20220302-180625    INFO] The BE node stop succefully [BeHost = 192.168.xx.xx, HeartbeatServicePort = 9050]
[20220302-180625    INFO] Stopping BE cluster ...

###########################################################################

[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster stop sr-c1 --role FE
[20220302-180849  OUTPUT] Stop cluster [clusterName = sr-c1]
[20220302-180849    INFO] Stopping FE cluster ....
[20220302-180849  OUTPUT] Stop cluster sr-c1
[20220302-180849    INFO] Waiting for stoping FE node [FeHost = 192.168.xx.xx]
[20220302-180851  OUTPUT] The FE node stop succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-180851    INFO] Waiting for stoping FE node [FeHost = 192.168.xx.xx]
[20220302-180854  OUTPUT] The FE node stop succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220302-180854    INFO] Waiting for stoping FE node [FeHost = 192.168.xx.xx]
[20220302-180856  OUTPUT] The FE node stop succefully [host = 192.168.xx.xx, queryPort = 9030]

停止特定节点

停止集群中的特定节点。

./sr-ctl cluster stop <cluster_name> --node <node_ID>

您可以通过查看特定集群的信息来检查特定节点的 ID。

示例

[root@nd1 sr-controller]# ./sr-ctl cluster display sr-c1
[20220303-185400  OUTPUT] Display cluster [clusterName = sr-c1]
clusterName = sr-c1
[20220303-185400    WARN] All FE nodes are down, please start FE node and display the cluster status again.
ID                          ROLE    HOST                  PORT             STAT        DATADIR                                             DEPLOYDIR
--------------------------  ------  --------------------  ---------------  ----------  --------------------------------------------------  --------------------------------------------------
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        DOWN        StarRocks/fe                                   /dataStarRocks/fe/meta
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        DOWN        StarRocks/fe                                   /dataStarRocks/fe/meta
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        DOWN        StarRocks/fe                                   /dataStarRocks/fe/meta
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        DOWN        StarRocks/be                                   /dataStarRocks/be/storage
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        DOWN        StarRocks/be                                   /dataStarRocks/be/storage
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        DOWN        StarRocks/be                                   /dataStarRocks/be/storage

[root@nd1 sr-controller]# ./sr-ctl cluster stop sr-c1 --node 192.168.xx.xx:9060
[20220303-185510  OUTPUT] Stop cluster [clusterName = sr-c1]
[20220303-185510    INFO] Stopping BE node. [BeHost = 192.168.xx.xx]
[20220303-185510    INFO] Waiting for stoping BE node [BeHost = 192.168.xx.xx]

集群扩容

您可以通过 StarGo 扩容集群。

创建配置文件

基于以下模板创建扩容任务拓扑文件。您可以根据您的需求指定文件以添加 FE 和/或 BE 节点。有关详细信息，请参阅配置。

# Add an FE node.
fe_servers:
  - host: 192.168.xx.xx # The IP address of the new FE node.
    ssh_port: 22
    http_port: 8030
    rpc_port: 9020
    query_port: 9030
    edit_log_port: 9010
    deploy_dir: StarRocks/fe
    meta_dir: StarRocks/fe/meta
    log_dir: StarRocks/fe/log
    priority_networks: 192.168.xx.xx/24 # Specify the unique IP for current node when the machine has multiple IP addresses.
    config:
      sys_log_level: "INFO"
      sys_log_delete_age: "1d"

# Add a BE node.
be_servers:
  - host: 192.168.xx.xx # The IP address of the new BE node.
    ssh_port: 22
    be_port: 9060
    be_http_port: 8040
    heartbeat_service_port: 9050
    brpc_port: 8060
    deploy_dir : StarRocks/be
    storage_dir: StarRocks/be/storage
    log_dir: StarRocks/be/log
    config:
      create_tablet_worker_count: 3

建立 SSH 相互身份验证

如果要向集群添加新节点，则必须在新节点和中心控制节点之间建立相互身份验证。有关详细说明，请参阅先决条件。

创建部署目录（可选）

如果要部署新节点的路径不存在，并且您有权创建此类路径，则无需创建此路径，StarGo 将根据配置文件为您创建它们。如果路径已经存在，请确保您具有对它们的写入访问权限。您还可以通过运行以下命令在每个节点上创建必要的部署目录。

在 FE 节点上创建 meta 目录。

mkdir -p StarRocks/fe/meta

在 BE 节点上创建 storage 目录。

mkdir -p StarRocks/be/storage

注意确保上述路径与配置文件中的配置项 meta_dir 和 storage_dir 相同。

集群扩容

通过运行以下命令扩容集群。

./sr-ctl cluster scale-out <cluster_name> <topology_file>

示例

# Status of the cluster before scale-out.
[root@nd1 sr-controller]# ./sr-ctl cluster display sr-test       
[20220503-210047  OUTPUT] Display cluster [clusterName = sr-test]
clusterName = sr-test
clusterVerison = v2.0.1
ID                          ROLE    HOST                  PORT             STAT        DATADIR                                             DEPLOYDIR                                         
--------------------------  ------  --------------------  ---------------  ----------  --------------------------------------------------  --------------------------------------------------
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          /opt/starrocks-test/fe                              /opt/starrocks-test/fe/meta                       
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          /opt/starrocks-test/be                              /opt/starrocks-test/be/storage                    

# Scale the cluster out.
[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster scale-out sr-test sr-out.yaml
[20220503-213725  OUTPUT] Scale out cluster. [ClusterName = sr-test]
[20220503-213731  OUTPUT] PRE CHECK DEPLOY ENV:
PreCheck FE:
IP                    ssh auth         meta dir                        deploy dir                      http port        rpc port         query port       edit log port  
--------------------  ---------------  ------------------------------  ------------------------------  ---------------  ---------------  ---------------  ---------------
192.168.xx.xx         PASS             PASS                            PASS                            PASS             PASS             PASS             PASS           

PreCheck BE:
IP                    ssh auth         storage dir                     deploy dir                      webSer port      heartbeat port   brpc port        be port        
--------------------  ---------------  ------------------------------  ------------------------------  ---------------  ---------------  ---------------  ---------------
192.168.xx.xx         PASS             PASS                            PASS                            PASS             PASS             PASS             PASS           


[20220503-213731  OUTPUT] PreCheck successfully. RESPECT
[20220503-213731  OUTPUT] Create the deploy folder ...
[20220503-213732  OUTPUT] Download StarRocks package & jdk ...
[20220503-213732    INFO] The package has already exist [fileName = starrocks-2.0.1-quickstart.tar.gz, fileSize = 1227406189, fileModTime = 2022-05-03 17:32:03.478661923 +0800 CST]
[20220503-213732  OUTPUT] Download done.
[20220503-213732  OUTPUT] Decompress StarRocks pakage & jdk ...
[20220503-213741    INFO] The tar file /home/sr-dev/.starrocks-controller/download/starrocks-2.0.1-quickstart.tar.gz has been decompressed under /home/sr-dev/.starrocks-controller/download
[20220503-213837    INFO] The tar file /home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1.tar.gz has been decompressed under /home/sr-dev/.starrocks-controller/download
[20220503-213837    INFO] The tar file /home/sr-dev/.starrocks-controller/download/jdk-8u301-linux-x64.tar.gz has been decompressed under /home/sr-dev/.starrocks-controller/download
[20220503-213837  OUTPUT] Distribute FE Dir ...
[20220503-213845    INFO] Upload dir feSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/fe] to feTargetDir = [StarRocks/fe] on FeHost = [192.168.xx.xx]
[20220503-213857    INFO] Upload dir JDKSourceDir = [/home/sr-dev/.starrocks-controller/download/jdk1.8.0_301] to JDKTargetDir = [StarRocks/fe/jdk] on FeHost = [192.168.xx.xx]
[20220503-213857    INFO] Modify JAVA_HOME: host = [192.168.xx.xx], filePath = [StarRocks/fe/bin/start_fe.sh]
[20220503-213857  OUTPUT] Distribute BE Dir ...
[20220503-213924    INFO] Upload dir BeSourceDir = [/home/sr-dev/.starrocks-controller/download/StarRocks-2.0.1/be] to BeTargetDir = [StarRocks/be] on BeHost = [192.168.xx.xx]
[20220503-213924  OUTPUT] Modify configuration for FE nodes & BE nodes ...
############################################# SCALE OUT FE CLUSTER #############################################
############################################# SCALE OUT FE CLUSTER #############################################
[20220503-213925    INFO] Starting follower FE node [host = 192.168.xx.xx, editLogPort = 9010]
[20220503-213945    INFO] The FE node start succefully [host = 192.168.xx.xx, queryPort = 9030]
[20220503-213945    INFO] List all FE status:
                                        feHost = 192.168.xx.xx       feQueryPort = 9030     feStatus = true

############################################# START BE CLUSTER #############################################
############################################# START BE CLUSTER #############################################
[20220503-213945    INFO] Starting BE node [BeHost = 192.168.xx.xx HeartbeatServicePort = 9050]
[20220503-214016    INFO] The BE node start succefully [host = 192.168.xx.xx, heartbeatServicePort = 9050]
[20220503-214016  OUTPUT] List all BE status:
                                        beHost = 192.168.xx.xx       beHeartbeatServicePort = 9050      beStatus = true

# Status of the cluster after scale-out.
[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster display sr-test 
[20220503-214302  OUTPUT] Display cluster [clusterName = sr-test]
clusterName = sr-test
clusterVerison = v2.0.1
ID                          ROLE    HOST                  PORT             STAT        DATADIR                                             DEPLOYDIR                                         
--------------------------  ------  --------------------  ---------------  ----------  --------------------------------------------------  --------------------------------------------------
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          /opt/starrocks-test/fe                              /opt/starrocks-test/fe/meta                       
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   StarRocks/fe/meta                            
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          /opt/starrocks-test/be                              /opt/starrocks-test/be/storage                    
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   StarRocks/be/storage                         

集群缩容

通过运行以下命令删除集群中的节点。

./sr-ctl cluster scale-in <cluster_name> --node <node_id>

您可以通过查看特定集群的信息来检查特定节点的 ID。

示例

[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster display sr-c1
[20220505-145649  OUTPUT] Display cluster [clusterName = sr-c1]
clusterName = sr-c1
clusterVerison = v2.0.1
ID                          ROLE    HOST                  PORT             STAT        DATADIR                                             DEPLOYDIR                                         
--------------------------  ------  --------------------  ---------------  ----------  --------------------------------------------------  --------------------------------------------------
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   /dataStarRocks/fe/meta                           
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   /dataStarRocks/fe/meta                           
192.168.xx.xx:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   /dataStarRocks/fe/meta                           
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage                        
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage                        
192.168.xx.xx:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage                        
[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster scale-in sr-c1 --node 192.168.88.83:9010
[20220621-010553  OUTPUT] Scale in cluster [clusterName = sr-c1, nodeId = 192.168.88.83:9010]
[20220621-010553    INFO] Waiting for stoping FE node [FeHost = 192.168.88.83]
[20220621-010606  OUTPUT] Scale in FE node successfully. [clusterName = sr-c1, nodeId = 192.168.88.83:9010]

[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster display sr-c1
[20220621-010623  OUTPUT] Display cluster [clusterName = sr-c1]
clusterName = sr-c1
clusterVerison = 
ID                          ROLE    HOST                  PORT             STAT        DATADIR                                             DEPLOYDIR                                         
--------------------------  ------  --------------------  ---------------  ----------  --------------------------------------------------  --------------------------------------------------
192.168.88.84:9010          FE      192.168.xx.xx         9010/9030        UP          StarRocks/fe                                   /dataStarRocks/fe/meta                           
192.168.88.85:9010          FE      192.168.xx.xx         9010/9030        UP/L        StarRocks/fe                                   /dataStarRocks/fe/meta                           
192.168.88.83:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage                        
192.168.88.84:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage                        
192.168.88.85:9060          BE      192.168.xx.xx         9060/9050        UP          StarRocks/be                                   /dataStarRocks/be/storage              

升级或降级集群

您可以通过 StarGo 升级或降级集群。

升级集群。

./sr-ctl cluster upgrade <cluster_name>  <target_version>

降级集群。

./sr-ctl cluster downgrade <cluster_name>  <target_version>

示例

[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster list
[20220515-195827  OUTPUT] List all clusters
ClusterName      Version     User        CreateDate                 MetaPath                                                      PrivateKey                                        
---------------  ----------  ----------  -------------------------  ------------------------------------------------------------  --------------------------------------------------
sr-test2         v2.0.1      test222     2022-05-15 19:35:36        /home/sr-dev/.starrocks-controller/cluster/sr-test2           /home/sr-dev/.ssh/id_rsa                          
[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster upgrade sr-test2 v2.1.3
[20220515-200358  OUTPUT] List all clusters
ClusterName      Version     User        CreateDate                 MetaPath                                                      PrivateKey                                        
---------------  ----------  ----------  -------------------------  ------------------------------------------------------------  --------------------------------------------------
sr-test2         v2.1.3      test222     2022-05-15 20:03:01        /home/sr-dev/.starrocks-controller/cluster/sr-test2           /home/sr-dev/.ssh/id_rsa                          

[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster downgrade sr-test2 v2.0.1 
[sr-dev@nd1 sr-controller]$ ./sr-ctl cluster list
[20220515-200915  OUTPUT] List all clusters
ClusterName      Version     User        CreateDate                 MetaPath                                                      PrivateKey                                        
---------------  ----------  ----------  -------------------------  ------------------------------------------------------------  --------------------------------------------------
sr-test2         v2.0.1      test222     2022-05-15 20:08:40        /home/sr-dev/.starrocks-controller/cluster/sr-test2           /home/sr-dev/.ssh/id_rsa                

使用 StarGo 部署和管理 StarRocks

安装 StarGo

部署 StarRocks 集群

前提条件

创建配置文件

创建部署目录（可选）

部署 StarRocks

查看集群信息

查看所有集群的信息

查看特定集群的信息

启动集群

启动集群中的所有节点

启动特定角色的节点

启动特定节点

停止集群

停止集群中的所有节点

停止特定角色的节点

停止特定节点

集群扩容

创建配置文件

建立 SSH 相互身份验证

创建部署目录（可选）

集群扩容

集群缩容

升级或降级集群

相关命令

您觉得这篇文档怎么样？

命令	描述
deploy	部署集群。
start	启动集群。
stop	停止集群。
scale-in	集群缩容。
scale-out	集群扩容。
upgrade	升级集群。
downgrade	降级集群
display	查看特定集群的信息。
list	查看所有集群。

安装 StarGo​

部署 StarRocks 集群​

前提条件​

创建配置文件​

创建部署目录（可选）​

部署 StarRocks​

查看集群信息​

查看所有集群的信息​

查看特定集群的信息​

启动集群​

启动集群中的所有节点​

启动特定角色的节点​

启动特定节点​

停止集群​

停止集群中的所有节点​

停止特定角色的节点​

停止特定节点​

集群扩容​

创建配置文件​

建立 SSH 相互身份验证​

创建部署目录（可选）​

集群扩容​

集群缩容​

升级或降级集群​

相关命令​

您觉得这篇文档怎么样？

安装 StarGo

部署 StarRocks 集群

前提条件

创建配置文件

创建部署目录（可选）

部署 StarRocks

查看集群信息

查看所有集群的信息

查看特定集群的信息

启动集群

启动集群中的所有节点

启动特定角色的节点

启动特定节点

停止集群

停止集群中的所有节点

停止特定角色的节点

停止特定节点

集群扩容

创建配置文件

建立 SSH 相互身份验证

创建部署目录（可选）

集群扩容

集群缩容

升级或降级集群

相关命令